TOP 4 Laser Cutter Dust Collector Comparison
TOP 4 Laser Cutter Dust Collector Comparison
Dust analysis
1:Laser cutting dust generated smoke less than 0.5 microns, a high concentration of dust generated during cutting.
2:temperature can reach 80 ~ 150 ° C (near the cleavage point), and with a high concentration of Mars.
3:The smoke is small and light, easy to move around and move irregularly.
Equipment selection design
1:The filter element of the dust collector adopts the special filter element for dry smoke, with a filtration accuracy of more than 0.5μm and 99.7%, and the filter wind speed is designed to be <1m/min;
2:The air inlet of the dust collector needs to add a pre-processor, which is mainly used to eliminate the sparks generated during laser cutting and prevent the occurrence of fire.
3:The laser cutting table adopts the combination of blowing and suction to deal with this type of dust. The cutting table is designed as an air supply port and an air suction port. Each air port is equipped with an air valve. When the cutting head reaches a certain area, the air valve in the area automatically Open to convect the blowing and suction openings and improve efficiency. At the same time reduce the air volume of the dust collector.
3:The laser cutting table adopts the combination of blowing and suction to deal with this type of dust. The cutting table is designed as an air supply port and an air suction port. Each air port is equipped with an air valve. When the cutting head reaches a certain area, the air valve in the area automatically Open to convect the blowing and suction openings and improve efficiency. At the same time reduce the air volume of the dust collector.
Famous Brand Laser Cutter Dust Collector Choose
|
Laser Brand
|
Original Country
|
Dust Collector Brand
|
Price
|
|
Trumpf
|
Germany
|
LTG AEROB
|
20714USD
|
|
Bystronic
|
Swizerland
|
DONALDSON
|
21500USD
|
|
Tanaka/Koike
|
Japan
|
AMANO
|
17142USD
|
Mitsubishi | Japan | AMANO | 17142USD |
Prima | Italy | DONALDSON/ACMAN CHINA | 21500USD/6500USD |
Han's | China | ACMAN | 6500USD |
Chutian | China | ACMAN | 6500USD |
|
BRAND/TYPE
|
POWER
|
AIRFLOW
|
PRESSURE
|
SPARK ARRESTOR |
|
LTG AEROB
|
5.5KW
|
5500M3/H
|
2.95KPa
|
NO |
|
DONALDSON
|
5.5KW
|
6000M3/H
|
3.1KPa
|
YES |
|
AMANO
|
3.7KW
|
4000M3/H
|
2.9KPa
|
YES |
ACMAN | 5.5KW | 6000M3/H | 3.3KPa | YES |
ACMAN
CONTACT ACMAN
