Categories
- Industrial Pulse Jet Dust Collector
- Cyclone Dust Collector
- Wet Scrubber
- Solder/Welding Fume Extractor
- Pharmaceutical Dust Collector
- Sandblasting Dust Collector
- Metalworking Dust Collection System
- Laser Fume Extractor
- PE Sinter-plated Filter and Equipment
- Dust Collection Auxiliary Equipment
- Central Vacuum Cleaning System/Unit
- Industrial Centrifugal Fan
- Sand Blasting Machine
- Bag In Bag Out Filter System
- Power Coating Machine/Powder Spraying System
Plasma Fume Extraction System, Plasma Dust Extractor
| Categories | Laser Fume Extractor |
|---|---|
| Brand | ACMAN |
| Model | TR-100B |
| Application | Industrial Dust/fume Extraction |
| Filter Material | Polyester Cartridge Filters |
| Cleaning Mode | Pulse jet compressed air backflow |
| Compressed Air Source | 0.4-0.6MP |
| Jet Control | Timer/pulse controller |
| Power Supply | 380V/50HZ or Customize |
| FOB port | SHANGHAI/INGBO |
| Terms of Payment | T/T |
| Update Time | Nov 22,2024 |
Detail Information
Plasma Fume Extraction System, Plasma Dust Extractor
How Does Plasma Fume Extractor Working?
Plasma Fume Extractor Working Principle
Compact design make the dust collection machine unit so small, it consist of blower, second filter(HEPA) available, pulse-jet cleaning system, high efficiency cartridge filters, dust bin and control cabinet.
Upper Setting: Big airflow and high pressure centrifugal fan. full pressure is about 2000Pa, ACMAN also could OEM super high pressure blower as you needs.
Pulse-jet Backflow System:This dust extractor could cleaning the filters automatically, it need 0.4-0.6mp compressed air source. Helping by the pulse controller and solenoid valves, the back flow air could clean the dust on the surface of the cartridge filters. Then the filter will renewable.
Cartridge Filter Part:The filter chooses high efficiency polyester cartridge type, it has big filtration area than normal one. PTFE coating/Anti-flammable filters are available.
Secondary Filter Part Available:HEPA filter always act as a second filtration part to protect the environment in case the leakage of the first filtration part.
Bottom Setting: Dust Bin/Dust Drawer Available on different working conditions.
Pre-Treatment: Spark Arrestor
The spark arrestor is designed to catch the big spark and hot particles which will come into the dust collector, and it is a safety device to avoid flame disaster.
This equipment is installed on line ducting.
The Spark Cooler is ideally suited to mitigate sparks generated in metal and other low-load material processing applications, under non-explosive conditions. The Spark Cooler works to create turbulence in the air flow stream, thereby disturbing the thermal bubble surrounding the spark and allowing the lower temperature in the gas stream to influence the particle temperature. It is not an extinguishing system and should never be applied as a standalone device in processes requiring absolute spark suppression
Advantage
1: Compact design(fan+jet system+filters+dust bin) saving lots of space for factories;
2: Larger filter areas than bag filter dust collector, because of its pleated cartridge filters;
3: Filters could renewable, the pulse-jet system keep the filters cleaning in a regular time;
4: Various of filter types, suitable for different working conditions;
5: Easy for maintenance: the filters are easy to change and only should remove dust regularly;
6: Less power consumptions: the centrifugal fan's design could provide high pressure and big airflow, the motor is E2 efficiency.
7: Air consumption is low: the compressed air consumption for pulse-jet is lower than baghouse;
8: Wide applications: it can catch fine dust in most of industrials, and removes dust from pulverizing and grinding, crushing, sanding, powder injection and sealing, severing and cutting, stone and metal work, cutting work, substrate work and welding work... but moisture/sticky dust;
9: The efficiency is about F9 grade, if have HEPA secondary filtration, the efficiency is about H13;
10: Lower Noise, with sound proof sponge and centrifugal fan isolation box;
11: Material: 2mm SS400 carbon steel with powder coating or stainless steel SUS304.
Paramaters
|
Model
|
Air volume （m³/h） |
Filter Area (m³) |
Fan pressure （Pa） | Power （kw） | Air Source (Mp) |
Sound （dB） |
|
TR-60B-J
|
4973-6457
|
48
|
2700-2200 | 7.5 | 0.4-0.6 |
75
|
|
TR-80B-J
|
7081-8489
|
60
|
2700-2200 | 11 | 0.4-0.6 |
78
|
|
TR-100B-J
|
8490-10455
|
75
|
2790-2020 | 15 | 0.4-0.6 |
80
|
Contact Us
Wechat
+86 19550289881
Info@dustscrubber.com
+86 18768123711
Please send your message to us
- Tel
- *Title
- *Content
Love discounts? Subscribe to newsletter!
subscription
Send Inquiry
Please send your message to us
- Tel
- *Title
- *Content
Company
Categories
- Industrial Pulse Jet Dust Collector
- Cyclone Dust Collector
- Wet Scrubber
- Solder/Welding Fume Extractor
- Pharmaceutical Dust Collector
- Sandblasting Dust Collector
- Metalworking Dust Collection System
- Laser Fume Extractor
- PE Sinter-plated Filter and Equipment
- Dust Collection Auxiliary Equipment
- Central Vacuum Cleaning System/Unit
- Industrial Centrifugal Fan
- Sand Blasting Machine
- Bag In Bag Out Filter System
- Power Coating Machine/Powder Spraying System
Mobile Web
